赤峰附近有没有服务

Welcome to the website of Shandong yechuang Experimental Equipment Co., Ltd! The company to stress integrity, quality management purposes, advanced technology, quality services to provide users with accurate, reliable, durable quality products.

 "Shandong industrial innovation experimental equipment"

Expert team, quality assurance and after sales service Solution provider

Yechuang is willing to work with you to create the world's high-end laboratory

National free hotline eighteen billion nine hundred and five million three hundred and one thousand six hundred and eighty-nine

Spare parts required for purchase

Source: unknown popularity: Time of publication: April 17, 2019 13:16

The experimental station furniture choose The accessories have the following requirements:

1. A special socket used for laboratory test: it is made of alkali with 96 × 96 steel, and the socket is made of six holes with the load of five holes and a special waterproof socket.

2. Nozzle test bench: specification 2.5mm, double connection, single connection, nozzle remote control, T-shape, vertical nozzle, etc., the material is molten copper; the wall thickness is 2.5mm, water ceramic valve, epoxy resin surface powder coating resin. The connection of nozzle pipe and water supply pipe joint is English 1 / 2 ". The water supply pipe test tube adopts copper pipe, plastic pipe RiFeng aluminum and gasket, which are made of molten copper material.

3. Test bed test tank: PP material, specification: 800x460x310large; 550x450x310 medium; 440x330x180 small; conventional laboratory Sink, medium size. PVC material of water has backwater curve.

Stand foot: it is a combination of stainless steel screw, nylon cover and rubber base. It has the characteristics of anti-skid, shock absorption, adjustable height, acid and alkali corrosion resistance, strong support capacity and so on. The height of the bench can be adjusted to 3 cm if it is not stable.

5. Door hinge: stainless steel plate 2.5 hours special hinge, stainless steel thickness 2.0 mm. The service life shall not be less than 100000 times.

6. Slide rail of the experimental platform: automatic descent and automatic closing of the guide rail.

Notes on installation of test bench

The lower cabinet of the test bench is organized according to the drawing. In the installation position, all cabinets of the same test bench are adjusted to the same height of the upper edge of the bottom cabinet (it is absolutely forbidden to add shavings without adjusting the level). After the horizontal adjustment is completed, the distance between the lower shell of the experimental platform and the bottom cabinet shall not be greater than 3 mm, and the upper and lower error of the joint shall not be greater than 2 mm. All cabinet connections must be made horizontally after connection if necessary. During connection, the distance between uniform and tight joints in the joint shall not exceed 2 mm, and the error of upper and lower joints shall not exceed 3 mm.

The panel of the test-bed should keep its integrity as far as possible, and the circuit board should be reduced as far as possible, and longitudinal connection is not allowed. Check whether there is water stop under the outer edge of the test bench, check the position and interface of water, electricity, air and air duct, check whether there is any deviation in the design, and timely communicate to determine the final solution.  

Ranking of similar articles

Latest news articles